Diamon Fusion - A Revolutionary Treatment for Glass

Diamon Fusion - A Revolutionary Treatment for Glass

Why Add Diamon-Fusion?

Untreated tempered glass does not have a smooth surface. In fact, under magnification, the surface of “regular” glass is rough and porous allowing water droplets to adhere to the glass leaving unsightly water marks.

Diamon-Fusion’s one-time permanent chemical treatment process uses a vapor mist that becomes absorbed into tempered glass, filling the uneven surface. This will transform the exterior plane into an ultra-smooth, optically clear protective layer.

Adding Diamon-Fusion to your glass closure to reduce maintenance time by at least 50%. Depending on the mineral content in your water, you can reduce the cleaning time up to 90%. No harsh, caustic chemicals are ever required to clean Diamon-Fusion glass. For routine cleaning use only a damp washcloth for spotless glass.

Save Time
After a shower, simply pour cool water along the top edge of the glass and watch most of the soapy residue run off. A dry washcloth will remove the few small drops of water that remain.

Diamon-Fusion will allow the maximum time between cleaning without permanent staining. If your enclosure is not maintained routinely, or you have hard water, it may be necessary to use a wet body scrubber. This is similar to those used with liquid body soaps to lightly scrub away any water spots or marks and will remove excess film.

Help the Environment
Using standard household glass cleaners on a Diamon-Fusion treated door will not harm the coating. The only requirement for cleaning treated glass is plain tap water. As a result, selecting Diamon-Fusion glass is environmentally safe.

Untreated Glass

Untreated Glass

Treated Glass

Treated Glass